Sparkling Stars Design
Whenever I make an original quilt, I first create it in Electric Quilt Software using the actual fabric swatches I plan to use. If it’s a scrappy-looking quilt, I won’t worry too much about color placement while I design. However, for Sparkling Stars, I took quite a while re-arranging the colors until I was pleased with how they looked.
I knew I wanted to use all 20 fabrics from Fandangle, but in a cohesive way. So I literally tried every fabric in the line in each part of the star blocks above until I was pleased with the final color arrangement. (I usually don’t save the “reject” versions because they are numerous and I don’t want to get confused by multiple images of the same file I’m working on.)
I love a pretty stack of cut units!
I planned the design months before I received fabric samples so that I could get the pattern written ahead of time. I knew time would be short in making the quilt so I tried to get as much work done ahead of time as I could. Once I start on a quilt, I’ll make it pretty quickly from start to finish since I’m usually working on a deadline.
Stacks and Stacks of HST’s in progress…
Making the Blocks
I try to assembly line my process, so I’ll cut everything ahead of time, then sew all the sub-units at once rather than constructing a quilt block by block. It’s much more efficient and I can pattern test as I go by doing it this way.
I keep similar units together to stay organized.
As you can see, there are a lot of pieces that go into making this quilt so I try to be as careful as I can during every step of the process. I sew with a consistent quarter inch seam, press my seams open, and trim my units as needed to the correct size. By taking care during each step of the process, it ensures the final blocks will go together smoothly.
Sparkling Star Quilt Blocks in Progress
When the sub-units are complete, I stack them up and lay them out in order next to my sewing machine so that I can chain piece as much as possible. I also take pictures as I go so I can look at a reduced view of the quilt blocks to make sure nothing is turned the wrong way before sewing together.
For these particular blocks, I made sure turn turn the “Beaded Curtain” print so that they were all facing the same direction. The rest of the prints are non-directional so they didn’t matter.
I sew with a shorter stitch length and press seams open as I go for best results.
Then I’ll pin the units together as I sew to get accurate seam joins.
Rather then sewing the blocks into rows, I sewed them into 4-patch units so they’d be easier to manage. It also allows makes me feel like I’m getting more done since it’s a lot of pieces to sew! The biggest tip is to just sew one step of ALL the blocks at a time and then take a break so it doesn’t get too monotonous.
These blocks will sparkle and glow in the final quilt!
When the blocks are complete, I’ll press them with a hot, dry iron on both front and back. This ensures nice flat blocks which will be much easier to machine quilt!
There are a total of 25 blocks in 6 different fabric combinations.
I wrote up the quilt pattern so that it would be extremely easy to follow along either using the same fabrics I did, or using similar colors to get the sparkling effect. Fandangle will start shipping to stores at the end of June, but you can pre-order bundles of the prints and yardage of the grays (along with the quilt pattern) over at shop.christaquilts.com for a limited time.
While I’m not offering kits, you can get the enough fabric to make this quilt when you purchase 1/2 yard bundles of both the cool and warm colorways; plus 3 yards of the light gray, and 2 yards of the dark gray. There will be a little left over that you can use for other projects.
Stay tuned for part 2 where I show how I put the quilt top together!