Now it’s time to get down to the nitty gritty of making this amazing quilt design by my talented friend Heather Black! Scroll to the end for links to her version of the quilt as well as links to all of the quilt along posts.

Click here to get the Geo Pop quilt kit, while supplies last.

If you’d like to work ahead and cut everything at once you are welcome to do that. However, I’ll be cutting and piecing each section, one week at a time. Today’s task is to make Row 1, below, shown on page 3 of the Infrastructure Quilt Pattern. Refer to cutting on page 4 of the pattern and sewing on page 8. If you would like to fussy cut your squares like I did, it will take a little more time, but it can give really cool results!

What is Fussy Cutting?

“Fussy” cutting means cutting your fabric in such a way that you are getting the exact part of the print that you want. You can do this by marking lines on your fabric where you will cut, or line up your ruler in the exact same spot when cutting. Usually, I don’t worry about the design of the print or the direction and all of the pieces end up looking random. However, with this quilt I thought it would be fun to take advantage of the strong geometrics in Geo Pop and cut around specific shapes to create a really cool effect.

Here’s a fast 4 minute video I created, showing how to fussy cut the Diamond Pop squares. Where you decided to fussy cut is up to you!

Important note: If you are fussy cutting the black/gray squares from exactly 1/3 yard of Mosaic Dots, you’ll need to first cut the strips to create row 3 (see pattern page 4). Then you’ll have just enough leftover to fussy cut the bullseye squares below.

Here’s what my fussy cut squares look like when they are all done. Remember, you can cut different areas of the fabric for less waste.

You can rotate the diamonds so they are all going the same way, or let them go in different directions for a more whimsical look! The bulls-eyes were cut from the Mosaic Dots print in black.

Sewing Row 1

The sewing is pretty straight forward and instructions are given in the pattern, but here are a few bonus tips:

• I’m using a shorter stitch length to piece (2.0 on my BERNINA instead of 2.5). This will make the seams a little stronger and will  help prevent the thread from showing through the seam. I’m also using a 1/4″ patchwork foot for precise seams and sewing slowly at the ends so that my seams don’t veer off as I come to the end of the unit.
• I’m “chain piecing” which means I’ll sew two pieces together and then the next two without breaking thread in between. I recommend starting and ending a sewing session with a scrap of fabric to catch any stray threads.
• I use a straight stitch plate when piecing. It seems to make a better stitch and prevents the fabric edges from getting sucked into the machine.
• I’m using 100% cotton, 50 weight thread from my Aurifil Neutrals collection for piecing. It blends into most of the fabrics and is thin but strong.
• I’m pressing ALL of my seams open. It takes a little longer to do, but the results are nice flat blocks which will create a nice flat quilt.
• When sewing the block units together, I’m keeping the dark gray fabric on top at all times. This will automatically ensure that each of the seams is sewn in opposite directions so the row doesn’t warp out of shape.
• I’m using lots of pins as I sew the top and bottom strips to the center section. Pin at the ends and then along the middle so that everything matches up. The number one cause of distortion in your quilt is when you ease in extra fabric when joining long pieced sections with strips.

Here’s another quick 2 minute video tutorial showing how I press my seams open:

Once the row is complete, I’ll give it a quick final press again from the back and also from the front. Then I’ll set it aside where I can keep it nice and flat. My design wall works great for this, but you can also hang it up on a hanger in your closet folded in half over a thick rounded clothes hanger.

Here’s a closeup of Row 1 so you can see how fun it looks when the fussy cut squares are all sewn together!

Giveaway Time & Heather’s Version!

This week’s giveaway is sponsored by Benartex. They are giving a way a few bundles of their brand new Superior Solids. These are the fabrics that Heather is using in her version of the quilt. So pop over to her blog to see what her version Row 1 looks like in solids. While you are there, be sure to enter the giveaway and see who won last week’s prize!

Share Your Work

Be sure to share pics of your progress on instagram by tagging us @christaquilts  and @quiltachusetts and use the search hashtag #infrastructurequilt in your post so others can see, too!

You can also share pics and ask questions in my Facebook group (whether or not you are making the quilt!)

Finished Row 1 made from Geo Pop fabric.

Other Important Links

• Click here for the complete Infrastructure supply List and QAL links.
• Click here for Heather’s week 2 blog post.
• Click here to get the Infrastructure Quilt Pattern – PDF version
• Click here to get the Infrastructure Quilt Pattern – Paper version

Next week we will make Row 2 – I can’t wait!

It’s finally here!! The start of our Infrastructure Quilt Along!! I love sharing quilt alongs with you because I get such joy out of encouraging others to make a complete quilt from start to finish. To kick off the QAL first we’ll discuss a bit about the design and then prep our fabric so we are ready to start cutting and sewing next week.

• Click here to get the Infrastructure Quilt Kit – While Supplies Last

Infrastructure Design

This was a fun collaboration between me and my talented friend Heather Black of Quiltachusetts. I asked Heather to design a modern block of the month type quilt without any curved piecing (her specialty) that would really showcase my Geo Pop fabric line. I was thrilled when she came up with this design and then I had the fun of breaking it down into sections and writing up the pattern.

Because Heather is such a fabulous designer, she had two ideas of how it could go together, either in blocks or rows. I decided that rows made more sense and figured that if we divided the design into 9 rows, that would work well to create the top row by row. Here’s an overview of each section of the quilt, which is explained step by step in the quilt pattern.

• Click here to get the Infrastructure Quilt Pattern – Digital Version
• Click here to get the Infrastructure Quilt Pattern – Print Version

You’ll notice there are some piece-heavy rows and some fairly simple pieced strip rows. This will allow us to keep up the interest while putting the quilt together over the 12 weeks, but also give us a few breaks so we don’t get burned out. You’ll also get to try out lots of different piecing techniques along with some optional fussy cutting!!

I highly recommend using the Tri-Recs ruler set for cutting the anvil blocks and diamond blocks. The pattern includes full size templates, but the ruler is so much faster and easier  – and I use it for lots of quilt patterns that I design.

• Click here to purchase a set of Tri Recs tools for easier cutting of triangles.

Prepping the Fabric

• Click here to get yardage and bundles of Geo Pop fabric shown above.

I’m using all 25 Geo Pop fabrics for my  version of Infrastructure. Of course you can make any fabric substitutions that you like – see the back cover of the pattern below for similar colors to use.

I’m a big advocate of prewashing because I’ve seen too many accidents occur even with high-quality fabric. I recommend separating lights and darks, and washing the fabrics using a couple of dye magnet sheets like Shout Color Catchers in the wash. This will help catch any excess dye and will prevent it from redepositing onto your fabric in places where you don’t want it to be.

If you are working with smaller chunks of fabric like less than 1/2 yard, you can put the fabrics in a mesh laundry bag to keep them from getting all tangled up.

After my fabric is washed, I iron it and starch it. I use a hot, dry iron on the highest setting and cheap starch from the grocery store. My favorite brand is Faultless premium starch.

Starching Tips

To prevent flaking, I spray starch completely on one side of the fabric I’ll be using. I let it rest for a few seconds, and then flip the fabric over to the back side to iron (the non starched side). Once that’s done, I starch the side I just ironed, and then flip it over to the previous side and press again. So I’m adding starch to both sides and ironing both sides, but the iron doesn’t burn the starch since I’m pressing from the opposite side. The starch makes the fabric stiffer so that there’s less stretch while manipulating it.

Check out this short video on how I starch and press my fabric:

Share Your Fabric Pull

Once you’ve decided on which fabrics you’ll use, be sure to tag us on instagram @christaquilts  and @quiltachusetts and use the search hashtag #infrastructurequilt so we can all admire your pretties!!

You can also share pics in my ChristaQuilts Facebook group and ask questions as you are getting ready. We’ll dive in and make Row 1 next week and I can’t wait to see your progress!

Enter the Givewaway!

Head over to Heather Black’s blog at Quiltachusetts to see which fabrics she’s working with and enter this week’s giveaway. The prize is a copy of EQ8 software from Electric Quilt! I use EQ8 for ALL of my quilt designs. In fact, I was able to take Heather’s original sketches, redraw them in EQ8 and easily recolor the quilt pattern using swatches of Geo Pop.  Now I can’t imagine making quilts without it!

Important Links

• Click here for the complete Infrastructure supply List and QAL links.
• Click here for Heather’s week 1 blog post.
• Click here to join my Facebook group.
• Click here to get the Infrastructure Quilt Kit while supplies last.
• Click here to get the Infrastructure Quilt Pattern – PDF version
• Click here to get the Infrastructure Quilt Pattern – Paper version